"Cooling Fan" first: Remove wet curtain (a total of four parts, can in no particular order.)
1, the upper portion of the first wet curtain next three screws.
2, holding the upper part of the wet curtain blinds, wet curtain gently pull it out and then put up a little wet curtain removed.
Second: "Cooling Fan" Remove the top and the water distributor assembly.
1, first tighten the screws on the top cover, and then lift the lid up to win.
2, the hose clamps on pipes and pipes loosen loosen the water distributor assembly lifted up and scored.
Third: pipe cleaning cloth.
1, if the hole on the clogged water distributor, you can use the wire to poke empty.
2, with the water stains on the cloth to clean the water.
Fourth: "Cooling Fan" chassis and accessories for cleaning.
1, cleaning the chassis: with a soft cloth or brush to clean the chassis.
2, cleaning blades: blades with a soft cloth to wipe. Be careful not to fall into the dust on the fan duct inside.
3, the cleaning level sensor: Available in small, damp cloth to clean dirty water on the plot clothes off.
4, cleaning pumps: Available pumps and filtration and washing the brush online product pollution clean.
5, washing clothes drain valve Note: drain valve at the bottom of the dirt.